Thank you for visiting The Floor Pro Community.
Register for FREE for even more features.    
The Floor Pro Community

Go Back   The Floor Pro Community » Public Forums for the PRO, Do-It-Yourselfer & Consumer » Floor Preparation


Nails or Screws for Attaching Underlayment



"Nails or Screws for Attaching Underlayment," in the Floor Preparation forum, begins: "I have yet another question. When ever I read about attaching a plywood underlayment to a subfloor it talks about ..."

Reply
 
LinkBack Topic Tools
Old April 9, 2009, 02:03 PM   #1
mauibumm
One of the Irregulars
 
mauibumm's Avatar
 
Join Date: Apr 2009
Location: Northern California
Posts: 15

Nails or Screws for Attaching Underlayment


I have yet another question. When ever I read about attaching a plywood underlayment to a subfloor it talks about using nails. I can't find any instruction or installation guidelines that note using screws.

I have read on this forum that it is possible to utilize screws but I don't understand why all the direction leave out using screws as an option.

I will be using a 3/8" plywood over a 2x6 TG subfloor if it matters.

Is there an advantage to using nails. Can I get away with screws? Is the fear of screws that they will be over driven????

TFP recommends cooking.com
mauibumm is offline   Reply With Quote
Old April 9, 2009, 02:21 PM   #2
Jim McClain
Admin/Founder
 
Jim McClain's Avatar
 
Join Date: May 2006
Location: teh Ether
Posts: 12,932

Re: Nails or Screws for Attaching Underlayment


Some of the problems with screws is the heads - they sometimes don't get driven flush, they break when being driven through denser materials or they get over-driven. Nailing (ring shank, non-coated, long enough to go through underlayment and well into subfloor) or stapling (1/4" crown, divergent points, long enough to go through underlayment and most of the way through subfloor) is the acceptable method and economical to boot. With a floating floor, you don't have to worry about the dents a hammer head makes, but they can be filled easily with patching compound for other types of flooring (like vinyl, etc.). Staples generally don't need to be patched, but you do need to make sure they are flush with the surface - not over-driven either.

Remember you are dealing with a thin piece of plywood. The screw head would tax the thickness of the plywood quite a bit, but the nail head not so much. A staple, even less (in 18 gauge).

I'm sure there are other pros who like the screw, but I never found the benefits worthy of the effort and possible liability (screw heads might not break immediately). But regardless of what you use, the fastening schedule (how many fasteners per) should be adhered to.

Jim

Jim McClain is offline   Reply With Quote
Old April 9, 2009, 05:40 PM   #3
stullis
Flooring Professional
Senior Member of TFP
charter member badge
 
stullis's Avatar
 
Join Date: Jun 2006
Location: Sauk Centre, Minnesota
Posts: 4,290

Re: Nails or Screws for Attaching Underlayment


Use a narrow crown stapler.
Rent one or better yet hire a pro to install your underlayment.

stullis is offline   Reply With Quote
Old April 9, 2009, 10:46 PM   #4
kwfloors
Fuzz on the brain
Senior Member of TFP
TFP supporter badge
 
kwfloors's Avatar
 
Join Date: Apr 2007
Location: NW Montana
Posts: 3,350

Re: Nails or Screws for Attaching Underlayment


Years ago Armstrong had a ulay guideline sheet on how to fasten the plywood to the floor. They said nailing with ringshanks no deeper than what you are nailing to or a mallet driven stapler. We also got a recommendation sheet on how much to nail a particular thickness of plywood to the floor from Plum creek which is our local mill. They had it down to how many nails to use. I use a 1/4 inch air stapler and am very picky on how to use it. You have to hold the sheet down with your foot and staple next to it to have the sheet tight to the floor. You can use screws but don't use any that are oiled and don't break any when you suck them down or else you have to get it out and drive another one.

kwfloors is offline   Reply With Quote
Old April 9, 2009, 11:12 PM   #5
Kman
Tile Expert
TFP supporter badge
author badge
 
Kman's Avatar
 
Join Date: Mar 2008
Location: NW Arkansas
Posts: 2,907

Re: Nails or Screws for Attaching Underlayment


I don't use nails, but I also don't put down anything less than 1/2". A ring shank or screw shank nail would work fine. You could probably rent an air nailer pretty cheap for the weekend.


One note on KWfloors advice, I agree that you have to hold the ply down with your foot, just make sure you don't nail too close to your foot. If you accidently hit a nail in the subfloor, the nail you're shooting could curl up and end in your foot, I've seen it happen.

Also make sure that your nails actually hit the subfloor and don't go between the planks.

Kman is offline   Reply With Quote
Old April 10, 2009, 09:07 AM   #6
mauibumm
One of the Irregulars
 
mauibumm's Avatar
 
Join Date: Apr 2009
Location: Northern California
Posts: 15

Re: Nails or Screws for Attaching Underlayment


Thanks, for the advice. I will have access to a stapler, a nail gun, or a screw gun. What I don't own my neighbor will have.
I am just trying to figure out what is the best method to secure the underlayment. I am not looking for the fastest or the cheapest, but the best. Perhaps there is no difference ???? When I discuss this with everyone locally they tell me to use screws. Their impression is that the screws are more secure and will adhere better. I get the impression they believe the nails may loosen or back out over time making the board loose or more susceptible to squeaking.

I was thinking of using screws based on what everyone told me, but looking up the installation instructions it only mentions nails or staples.
From what I gather on this board the method of attaching it probably doesn't ultimately matter so long as it is done properly (ahh and that screwing them is an acceptable method).

mauibumm is offline   Reply With Quote
Old April 10, 2009, 09:10 AM   #7
rusty baker
Semi-Retired
Senior Member of TFP
charter member badge
 
Join Date: May 2006
Location: Missouri
Posts: 6,211

Re: Nails or Screws for Attaching Underlayment


Professionals flooring installers use a stapler. It holds better and gives you a smoother surface.

rusty baker is offline   Reply With Quote
Old April 10, 2009, 09:21 AM   #8
Barry Carlton
Flooring Professional
Senior Member of TFP
author badge
 
Barry Carlton's Avatar
 
Join Date: Sep 2007
Location: Boise, Idaho
Posts: 7,613
Send a message via Skype™ to Barry Carlton

Re: Nails or Screws for Attaching Underlayment


rusty baker said View Post
Professionals flooring installers use a stapler. It holds better and gives you a smoother surface.
Staples are coated usually, increasing their holding power.
Staples are usually either convergent (meaning the 'legs' pull together as they are driven in), or divergent (meaning the 'legs' spread apart as they are driven in) thus, increasing their holding power.

That and they are usually less expensive, faster, and easier than nails or screws.

Many pros to using staples and few cons.

b

Barry Carlton is offline   Reply With Quote
Old April 10, 2009, 11:04 AM   #9
mcbrides
Canadian Installers
 
mcbrides's Avatar
 
Join Date: Oct 2008
Location: Winterpeg, MB
Posts: 2,424
Send a message via Skype™ to mcbrides

Re: Nails or Screws for Attaching Underlayment


Whether you screw, nail or staple your 3/8ths underlayment depends completely upon what flooring product you are planning to put over it. The purpose of an underlayment for vinyl is to have a glass-smooth surface to glue to (1/4 ply is the industry standard), whereas an underlayment for ceramic tile is to add strength (and 3/8ths isn't thick enough). Nevertheless, we would only fasten either 1/4 or 3/8ths with subfloor staples, 4" apart in the field, 1" apart on the seams, make sure to stagger the corners and do not use ripped edges anywhere but at the perimeter.

mcbrides is offline   Reply With Quote
Old April 10, 2009, 11:19 AM   #10
Daris Mulkin
The One and Only
Senior Member of TFP
charter member badge
 
Daris Mulkin's Avatar
 
Join Date: Jun 2006
Location: Davison,Mi
Posts: 8,231

Re: Nails or Screws for Attaching Underlayment


One of the problems with screws is that once set tight there is no give and take with the movement of the house in weather changes and such. It could cause the heads to shear off. Nails or staples are the best choices.

My opinion and I'm sticking to it-maybe.

Daris

Daris Mulkin is offline   Reply With Quote
Old April 10, 2009, 11:40 AM   #11
mauibumm
One of the Irregulars
 
mauibumm's Avatar
 
Join Date: Apr 2009
Location: Northern California
Posts: 15

Re: Nails or Screws for Attaching Underlayment


"My opinion and I'm sticking to it-maybe."

That was funny!

mauibumm is offline   Reply With Quote
Old April 10, 2009, 01:48 PM   #12
Kman
Tile Expert
TFP supporter badge
author badge
 
Kman's Avatar
 
Join Date: Mar 2008
Location: NW Arkansas
Posts: 2,907

Re: Nails or Screws for Attaching Underlayment


mauibumm said View Post
When I discuss this with everyone locally they tell me to use screws. Their impression is that the screws are more secure and will adhere better. I get the impression they believe the nails may loosen or back out over time making the board loose or more susceptible to squeaking.

I was thinking of using screws based on what everyone told me, but looking up the installation instructions it only mentions nails or staples.
From what I gather on this board the method of attaching it probably doesn't ultimately matter so long as it is done properly (ahh and that screwing them is an acceptable method).
If I was going to use nails I would use a ring shank or screw shank nail. They have much better holding power than regular nails. Did I mention this in an earlier post? Sorry, senility setting in fast.

Kman is offline   Reply With Quote
Old April 10, 2009, 10:51 PM   #13
kwfloors
Fuzz on the brain
Senior Member of TFP
TFP supporter badge
 
kwfloors's Avatar
 
Join Date: Apr 2007
Location: NW Montana
Posts: 3,350

Re: Nails or Screws for Attaching Underlayment


mcbrides said View Post
Whether you screw, nail or staple your 3/8ths underlayment depends completely upon what flooring product you are planning to put over it. The purpose of an underlayment for vinyl is to have a glass-smooth surface to glue to (1/4 ply is the industry standard), whereas an underlayment for ceramic tile is to add strength (and 3/8ths isn't thick enough). Nevertheless, we would only fasten either 1/4 or 3/8ths with subfloor staples, 4" apart in the field, 1" apart on the seams, make sure to stagger the corners and do not use ripped edges anywhere but at the perimeter.
3/8ths isn't thick enough? I see 1/4" and ditra mat all the time. Make sure the staples are close to the edge of the sheet, no farther that a strong 1/8" from the edge and you can't have too many.

kwfloors is offline   Reply With Quote
Old April 11, 2009, 12:36 PM   #14
Country Flooring Direct
Flooring Professional
 
Join Date: Oct 2008
Location: Greater Nashville TN area
Posts: 476

Re: Nails or Screws for Attaching Underlayment


what are we installing over this plywood? Im just curious!

Country Flooring Direct is offline   Reply With Quote
Old April 11, 2009, 01:57 PM   #15
Barry Carlton
Flooring Professional
Senior Member of TFP
author badge
 
Barry Carlton's Avatar
 
Join Date: Sep 2007
Location: Boise, Idaho
Posts: 7,613
Send a message via Skype™ to Barry Carlton

Re: Nails or Screws for Attaching Underlayment


countryflooringdirect said View Post
what are we installing over this plywood? Im just curious!
Laminate flooring.
And for her purposes I think she decided on Halex 4X4 9mm sheets.

b

Barry Carlton is offline   Reply With Quote
Reply


Go Back   The Floor Pro Community » Public Forums for the PRO, Do-It-Yourselfer & Consumer » Floor Preparation
go to previous or next topic in this forum
« What underlayment should I use | Concrete Slab VS. Wooden Subfloor »

Topic Tools


Similar Topics to Nails or Screws for Attaching Underlayment
Topic Topic Starter Forum Replies Last Post
Face Nail or screws jaynic Hardwood and Laminates Q&A 4 January 20, 2009 08:34 AM
staples or nails? Glue? CBGumby Hardwood and Laminates Q&A 2 August 9, 2007 07:32 PM
squeaky floor woes that screws/nails wont solve! zimzum Hardwood and Laminates Q&A 19 July 25, 2007 06:59 AM
cut those nails - or - floor fade selvalee Flooring Inspection Services 4 November 13, 2006 03:00 AM
They say NO NAILS Lo Down Carpet Sales and Installations 14 August 24, 2006 12:46 AM

collapse Log in
User Name:

Password:

Not a member yet?
Register Now!
support TFP

Specialty Equipment Rentals
Visit us on facebook
JonnyCorners

backcountry.com

All times are GMT -7. The time now is 12:08 PM.

Home   About   Contact   TOS   Privacy   Website Map  

Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd. | All Site Content 2006-2014 TheFloorPro.com