March 7, 2010, 01:49 PM
|
#4
|
|
Brand New Member
Join Date: Feb 2010
Posts: 8
|
Re: Mapei Ultrabond Hardwood Flooring Glue
Heritage Hardwood said
You should be fine, get the lid on as tight as possible. you will have a decent skin on it within a few weeks of about maybe 3/4" thick. Just cut around the edges and discard. if its going to be longer than a few weeks then rub some of the glue around the rim of the bucket and use some heavy duty 3-6mil plastic and place this over the opening and then put the lid back on. when your done flip the bucket over and store upside down. This way you will get a smaller skin but it will form on the bottom and when you set it upright and open the bucket your glue is wet and ready to go like new.
|
good news and thanks for the tips!
|
|
|