March 23, 2011 until April 23, 2021
|
|
Administrator
Join Date: May 2006
Location: teh Ether
Posts: 6,637
|
Warning About Asbestos in Old Resilient Flooring Products
WARNING!
Do not sand, dry sweep, dry scrape, drill, saw, beadblast, or mechanically chip or pulverize existing resilient flooring, backing, lining felt, asphaltic "cutback" adhesive or other adhesive.
These products may contain asbestos fibers and/or crystalline silica.
Avoid creating dust. inhalation of such dust is a cancer and respiratory tract hazard. Smoking by individuals exposed to asbestos fibers greatly increases the risk of serious bodily harm.
Unless positively certain that the product is a non-asbestos-containing material, you must presume it contains asbestos. Regulations may require that the material be tested to determine asbestos content.
RFCI's Recommended Work Practices for Removal of Resilient Floor Coverings are a defined set of instructions addressed to the task of removing all resilient floor covering structures.
RFCI May 2011
|
|
|
